Please DO NOT use public IP address when generating your pdf using wkhtmltopdf/wkhtmltojpg if you have PFSense running as a firewall.
Use localhost, this will save you headaches.
I’m using WKHTMLTOPDF to convert html to pdf and inside the html contains links to images. Now the address used is the public IP address but wkhtmltopdf is running internally in the local network with its ‘web browser’. See the problem here? Normally, routers allow NAT Reflection/Loopbank… PFSense blocks this by default. So my images were not rendering, for which leaves the wkhtmltopdf process to lag behind due to it waiting for a reply from the server which PFSense is denying, timeout it around 60 sec ( 1 Min ).
I wanted to study JPMorgan’s Quorum Blockchain and going to install Cakeshop, their development environment, under Ubuntu 16.04.2 and Tomcat8 web server.
There were some bumps that were unavoidable but the developer was very helpful in debugging and help me setup the server. Shout out to fixanoid
- Install Ubuntu 16.04.2
- Update to latest updates
- Install Java 8 (Open JDK)
- Install Tomcat8
- Follow the installation instruction here… BUT don’t start the server yet.
- Instead of setenv.sh, edit Tomcat8 startup script under /etc/init.d/ folder.
- Under catalina_sh() function, go to TOMCAT_SH= line
- Before that, add this command…. JAVA_OPTS=”$JAVA_OPTS -Dspring.profiles.active=local -Deth.config.dir=[Your/folder/path/accessible/to/tomcat8/user]”
- Start the server /etc/init.d/tomcat start, then stop it /etc/init.d/tomcat8 stop
- The server will not yet run peroperly and error logs will populate catalina.out logs, but this will populate config files int the folder you passed in JAVA_OPTS (eth.config.dir=[Your/folder/path/accessible/to/tomcat8/user])
- No go to the folder, under the local folder, edit application.properties
- Locate geth.identity=
- Add any node name you want it to be
- Save the file, exit and start the server again
- This should start the server properly now. You check the catalina.out logs.
- You can access the site via http://IP_ADDRESS:8080/cakeshop/
Encountered this problem today while testing an image upload AJAX script in tomcat. Later on I found out that the folder is actually protected Win7 and tomcat couldn’t write the cache or temporary file into the folder.
So anyone having this problem, check the following…
- What OS are you running? Vista/Win7?
- What IDE are you using?
- Was your IDE elevated to admin status?
So, check your OS, I’m using Win7. I was developing this under WinXP a few months back, and now under Win7, the folder is protected since it was under the “Program Files (x86)” folder group. (Argh!)
I closed my IDE, using IDEA IntelliJ 9.0, ran the IDE under “Administrator Level” and the problem disappeared!
So check those out first.
These are the steps I took to install Jakarta Tomkat 5.5 in conjunction with Java 2 SDK in Ubuntu server.
- Login as root, you can also use “su” though I prefer to login as root.
- apt-get install sun-java5-jdk
apt-get install tomcat5.5 tomcat5.5-admin tomcat5.5-webapps
- This will install Java 2 SDK (1.5), ubuntu will start downloading packages that are not found in your system.
Now here’s the tricky part, location for Java and jakarta-tomcat
- Of course jakarta-tomcat 5.5, I’m using 5.5 since this supports java 1.5
Now, open .bashrc in your favorite text editor, I used vim
At the end of the file add these:
- Java’s location is in /usr/lib/jvm/java-1.5.0-sun
- Jakarta-Tomcat’s location is in /usr/share/tomcat5.5
- We will need these location for the export configurations to be written in the .bashrc
Now save the file and exit, then log back in. This is required for the export script to be set.
Before starting the server, the default port the installer set is 8180 instead of the 8080 port that Tomcat uses. To change this, go to /usr/share/tomcat5.5/conf/ and open the file server.xml. Locate the line:
...Connector port="8180" maxHttpHeaderSize="8192"...
and change 8180 to 8080. Save and exit. Now your ready to test the server.
Now try the server if it starts, /usr/share/tomcat5.5/bin/startup.sh You should see something like this:
Shutting down the server is just /usr/share/tomcat5.5/bin/shutdown.sh
Now, during installation of tomcat, Ubuntu automatically adds a startup and shutdown script for ubuntu to use as it starts up or shutsdown in /etc/init.d/ folder. Filename is tomcat5.5. As the server finishes starting up, you will notice tomcat isn’t running at all. One possible problem is that the script didn’t use the correct path for the java 2 sdk. You can check the boot log in /var/log/. Check if during boot up, tomcat5.5 encountered problems. For the problem stated above, you can fix this by going to /etc/default/ and edit the tomcat5.5 file. Locate the line:
Using CATALINA_BASE: /usr/share/tomcat5.5
Using CATALINA_HOME: /usr/share/tomcat5.5
Using CATALINA_TMPDIR: /usr/share/tomcat5.5/temp
Using JRE_HOME: /usr/lib/jvm/java-1.5.0-sun
remove the ‘#’ and change it to…
or wherever your java directory is.After that, restart the server and see if tomcat was successfully started.
Edit: Problem encountered:
- Tomcat does not load in Ubuntu 8.04
Found a little problem loading Tomcat 5.5 under Ubuntu 8.04, it either fails or white screen just appears. I don’t know what happened from 6.04 to 8.04 but once I compared the init.d/tomcat5.5 startup script from 6.04 and 8.04, there WERE changes to the scripts. I replaced the new tomcat5.5 script in 8.04 with the old one from 6.04 and the server started properly after a server restart. I don’t know why but this may have something to do with permissions and I have yet to trace the script.
- java.lang.ClassNotFoundException: org.apache.jasper.tagplugins.jstl.If
- The problem here is that the above name is incomplete… what it should have been is org.apache.jasper.tagplugins.jstl.core.*
- Now, to fix the problem, locate
/var/lib/tomcat5.5/webapps/jsp-examples/WEB-INF/tagPlugins.xml and open it with your text editor… I used vim. Now edit each line of code that has org.apache.jasper.tagplugins.jstl in it and add “.core” after jstl. What you will see after editing the code will be…
- SEVERE: The scratchDir you specified: [folder_path] is unusable.
- Sidenote: took me 2 days to figure out why this was happening (X_x)
- Based from the Catalina logs, the folders under webapps was not accessible by tomcat5.
- Now looking under all processes running ( ps command ), most bootup services were running under root (mysql, apache, etc ) but tomcat5 was not.
- If I start tomcat5 when I logged into the console as root, the problem disappears. This lead me to believe this might have been the Tomcat5 user was not given the correct privileges.
- Work-around 1: Elevate Tomcat5 user to root access level.
- Work-around 2: Go to /etc/init.d/ and open Tomcat5.5 under any text editor ( I used vim ). Locate the line TOMCAT5_USER=tomcat55 and change it to TOMCAT5_USER=root . Restart your server or you can also execute the restart command for Tomcat5.5 in init.d folder